Differences

This shows you the differences between two versions of the page.

--- classes [2017/02/20 20:32] – karenc
+++ classes [2023/03/22 18:53] – pbasu
@@ Line 1: / Line 1: @@
-The Bodgery has a Green/Yellow/Red marked tool system.
+====== Classes, classrooms and tool checkoffs ======
+** ''Class''**
-**GREEN** - Tools that may be used by any **//member//** or **//guest//** without requiring prior check-out or training.
+//1. Instructions for Class instructors//
+a. Before you start to fill the google form, please check availability of the Clean or Shop classroom (links are pinned to #classes on Slack)
-**YELLOW** - Tools that may only be used after a **//member//** or **//guest//** has been checked out on a tool by an instructor-level member. Person's name should be put on the approved list for that tool.
+b. Please fill up the google forms that are linked below in this message . Fill them out following the guidance provided. **The online forms are a requirement and not optional**. They are also good for record keeping, for finances, and grants.
+c. If you have attachments (PDFs or photographs) please email them to events@thebodgery.org
+If you'd like your classes to be posted on social media? Photos are needed. Email or Slack them to me or
+@Cassie (she/her)
-**RED** - Tools that may only be used by **//members//** that have had complete training on a tool. (A trained member is one who has been trained and checked out by the tool overlord/champion) Person's name should be put on the approved list for that tool.
+d. The instructor is responsible for booking the "Shop classroom" or the "Clean classroom" if you're using those rooms.
-===== List of members who are certified to check off others by tool. =====
+e.If you're using the Shop classroom, informing
+@Steve Howe (Machining Co-captain)and blocking of the CnC router calendar is highly advised.
+f. Fill out the second google form after the class has been taught to get your dues.
+If your class allows non-members; they'll need help getting into the building. We do not recommend leaving the front door open without oversight.
-//Member class fees are typically half the price of guest fees. All students are required to pay the full Materials fee amount.//
+g. Non member instructors? Non-member teachers always have a $5/student fee.
-^ Area            ^ Tool Color      ^ Tool      ^Certified Member^ Guest Fee^ Member Fee^Materials Fee^
+h. Bodgery fees
-| Woodshop    |Yellow | Table Saw     | James Pittman, Roger Straw, Alex Kovell|
+  * Member teachers have a $5/student fee if their teaching fees are over $15/student.
-| Woodshop    |Yellow | Band Saw, Scroll Saw     | James Pittman, Roger Straw, Alex Kovell, Karen Corbeill|
+  *
-| Woodshop    |Yellow | Belt Sander     | James Pittman, Roger Straw, Alex Kovell, Karen Corbeill|
+  * Member teachers with <$15/student teaching fees have the Bodgery overhead fee waived.
-| Woodshop    |Yellow | Table Router     | James Pittman, Roger Straw, Alex Kovell|
+  *
-| Woodshop    |Yellow | Planer     | Roger Straw, Alex Kovell, Karen Corbeill|
+  * However, an exception was made for red tool checkoffs.
-| Woodshop    |Yellow | Jointer     | James Pittman, Roger Straw, Alex Kovell|
-| Woodshop    |Red | Wood Lathe     | Roger Straw|
+i. If you would like student names, please let me know and I'll get them to you ASAP. If you need to know how many people are attending, please ask me.
-| Metalshop   |Yellow | Bench Grinder, Angle Grinders     | Karen Corbeill, Randy Nelson, Mike Rousonelos|
-| Metalshop   |Red | MIG Welder     | Karen Corbeill, Randy Nelson, Mike Rousonelos|$30|$15|
+j. If needed for tax purposes; the Bodgery treasurer will reach out to instructors privately.
-| Metalshop   |Red | TIG Wedler     | Karen Corbeill, Randy Nelson|$30|$15|
-| Metalshop   |Yellow | Blast Cabinet     | Karen Corbeill|
+k. Questions? Please reach out via Slack on #classes, or via email events@thebodgery.org
-| Machining   |Red | Tormach CNC Mill     | James Pittman|
-| Machining   |Red | Manual Metal Mill     | (instructor needed)|
+l. Google forms-This form is the only form I use to post the classes. Occasionally I may reach out for photographs. Please enter everything that you need posted. The onus of entering the information/ details is on you. I will not be looking for 'previous classes' to enter details. That's time consuming and if I can do it, so can you.
-| Machining   |Red | Manual Metal Lathe     | (instructor needed)|
+The forms helps all of us keep a track of the classes posted.
-| CNC    |Red | Laser Cutter     | James Pittman, Karen Corbeill|
+https://forms.gle/5b1bcNZCjjidxugP9
-| CNC    |Red | 3D Printers     | Timm Murray|
+Once the class is taken, please fill out this form
-| CNC    |Red | Vinyl Cutter     | James Pittman, Karen Corbeill|
+https://forms.gle/eHi71MYHpauKgbNz6
-| CNC    |??? | Carvey     | James Pittman|
-| Craft    |Red | CNC Embroiderer     | Dawn Chute|
+. The Bodgery also has a "Computer classroom" and a "shop classroom" for general class use.
+a. Computer classroom: has tables and seating for up to about 20 people, a white board, a 1080p projector, and eight [[classroom_computers|computers]] for students (and one for the instructor).
+b. Shop classroom: is located in the main shop area. It has 4 small workbenches and 2 larger workbenches. It can seat up to 20 people. The area is in use but is still being worked on actively to increase facilities.
+**''Classroom use rules and guidelines''**
+a. The purpose of the shop classroom is primarily to teach, be it woodwork, stain glass, Kumiko etc. The shop classroom may also be used for hosting ‘maker’ groups like Madison Woodworkers guild etc. or for certain woodworking activities that are less dusty.
+b. Classes take priority over other activities in the Shop classroom.
+c. Class instructors must book their time on the Team UP calendar. The link to which is pinned on #classes on Slack.
+d. All users are responsible for cleaning up the Shop Classroom after use. Please also return equipment and furniture to their original layout so others may enjoy the space as well.
+e. Both the classroom (Shop classroom, as well as Computer classroom) should not be used for storing projects or any other member owned material. If found, these will be delt with as ‘abandoned items’ as defined in Bodgery Standing Rules (Section 5.2).
+https://wiki.thebodgery.org/doku.php?id=standing_rules
+f. The Shop classroom may be used for large project assembly in case no classes are planned. Projects should be removed within 24 hours. Please use the ‘Assembly area’ permits to identify your project with name and contact information.
+g. Before members plan to use the Shop classroom, please check the Team Up Classroom calendar for classes. Sometimes there may be a Make-up class that was rescheduled because of weather or sickness.
+h. Please do not use the machinery in the Shop Classroom unless you have cleared it with the Woodshop captains and trainers. Some equipment is on loan.
+i. Dust collection needs to be priority if you are working with motorized tools. Please ask if you are unsure of what is allowed and what isn’t.
+j. If in doubt please contact the Bodgery Event Coordinator (Puja Basu)
+The Bodgery board reserves the right to tweak these guidelines.
+**''Tool checkoffs''**
+If you're interested in tool checkoffs, classes, or meetups that you don't see listed on our Calendar, you can contact us with your request - please email //**contact@thebodgery.org**// or //**events@thebodgery.org**//.
+You may also email the area captains if your request pertains to a certain zone in the shop.
+^Area^Email^
+|CNC/Fab Lab|cnc@thebodgery.org|
+|3D Printing|3dprinting@thebodgery.org|
+|Craft Meadow|craft@thebodgery.org|
+|Wood Shop|woodshop@thebodgery.org|
+|Metal Shop/Welding|metalshop@thebodgery.org|
+|Blacksmithy|blacksmithing@thebodgery.org|
+|Machine Shop|machineshop@thebodgery.org|
+|Electronics Lab|electronics@thebodgery.org|
+|General Classes/Events|events@thebodgery.org|
+|Glass Works|glass@thebodgery.org|
+For a schedule of our current events and classes, check out or [[http://www.thebodgery.org/events/|Events Calendar]] or [[https://www.meetup.com/MadCity-Makers/|Meetup Page]]
+===== Tool Checkoffs =====
+The Bodgery has a Green/Yellow/Red marked tool system.
+(Some Bodgery tools are owned by members and on-loan to the Bodgery.)
+**GREEN** - Tools that may be used by any **//member//** or **//guest//** without requiring prior check-out or training. These include tools that require no power or have no moving parts like a soldering iron, hot glue gun, heat gun, or clothes iron.
+**YELLOW** - Tools that may only be used after a **//member//** or **//guest//** has been checked out on a tool by an instructor-level member. Person's name should be put on the approved list for that tool.
+These tools take about 15 minutes to learn how to use safely.
+**RED** - Tools that may only be used by **//members//** that have had complete training on a tool **or** members/nonmembers as part of a class. (A trained member is one who has been trained and checked out by the area captain or area captain assistant.) These tools are significantly dangerous, expensive, or designated such by its owner.