Differences

This shows you the differences between two versions of the page.

--- space_improvements [2014/08/25 23:56] – karenc
+++ space_improvements [2016/03/10 21:02] – karenc
@@ Line 5: / Line 5: @@
-  * Purchase 4x8 sheet of white board (Home Depot, cheap), cut to length to cover back of tool wall.
+  * Make Materials Fees Boxes for
-  * Build lockable Donation/Materials Fees Boxes for
+    * Vinyl Cutter
-    * Main door, Laser Cutter, Vinyl Cutter, Welding area, Fridge
+    * Welding area
-  * Buy/install flip-down door-stop for main exterior door
+    * 3D Printer
-  * Create a doorbell.
+    * Fridge
-  * Create a switch in the shop that posts an "Open Shop" message to the internet.
+  * Install second webcam in clean room.
-    * Install a camera that can post snapshots of the shop to the website.
   * Sort hardware in parts bins.
-  * Re-label tool drawers - reorganize if necessary.
+  * Plumb kitchen sink (requires water shutoff in next-door unit)
+  * Put sign-off sheets at each tool.
-  * <del>Buy/install 4x4 post to replace loft tree/log on outer corner of loft</del>
+  * Calibrate 3D Printers
-  * <del>Build rolling wall between lounge/underloft and sink area.</del>
+  * Install legs on fabric cutting table.
-    * <del>Install barrel bolts to side posts (top and bottom) to keep stable.</del>
+  * Add light to building facade sign
-  * Build a frame for the welding curtain. (Can be out of metal or wood. Should collapse somewhat so it can be easily stored or tucked away.
+  * Make light-up Bodgery sign for window
-  * Install better lights under loft
+  * New sign for end of driveway
-  * Reinforce fencing railing in loft
+      * Add driveway lights
-  * Take white painted board in loft area, add legs to make an electronics table.
-    * Build shelf to be attached to and go over electronics bench.
-  * Use door to create a craft table to go along the south fence in the loft
-  * Attach metal vise and bench grinder
-=== Shopping List ===
-  * 2 Large Garbage Cans