Differences

This shows you the differences between two versions of the page.

--- equipment:3d_printer:printrbot_simple [2016/01/23 03:43] – [Material Information] Karen Corbeill
+++ equipment:3d_printer:printrbot_simple [2022/05/29 16:01] (current) – external edit 127.0.0.1
@@ Line 6: / Line 6: @@
 ===== Cost To Use =====
-$.10/oz of any used filament (including errors)
+$.06/gram of any used filament (including errors)
-Donation Box next to Device
+Donation Box in 3D Print room
 ===== Notes =====
-You MUST BE TRAINED before using it alone. Ask for help from those who have been trained, and\\
+You MUST BE TRAINED before using this printer.
-Contact James Pittman to set up an appointment for your training.
+Contact 3DPrinting@thebodgery.org to set up an appointment for your training.
  ===== Specs =====
+Bed size: 150mm x 150mm
+Direct drive extruder
+File type used: .stl
  ===== Material Information =====
+Filament size: 1.75mm
 PLA
+PETG
+TPU
-ABS
+Before using any other filament type consult with a team captain.
+No profile yet for Simplify3D so use Repetier or Cura to slice and print.
  ===== On loan from =====
-James Pitman
+James Pittman
 ===== Manuals =====
-[[https://printrbot.dozuki.com/Document/141/.pdf|Getting Started Drive]]
+[[https://drive.google.com/drive/u/0/folders/0B9oj0J-4qhdjNU1VcmVhS3IwLXc|Best remaining documentation for the defunct Printrbot company]]
-[[https://printrbot.dozuki.com/Guide/Simple+Maker's+Edition+(1405)/123|Other Documentation]]