Differences

This shows you the differences between two versions of the page.

--- equipment:stacker_3d_printer [2017/08/01 19:58] – [Cost To Use] Peter Liethen
+++ equipment:stacker_3d_printer [2018/03/18 17:54] (current) – Delete old equipment Timm Murray
@@ Line 1: / Line 1: @@
-====== 4-Head 3D Printer ======
-~~NOTOC~~
-{{ :equipment:3d_printer:stacker_3d_printer_4_head.jpg?400|}}
-===== Make/Model =====
-Stacker 500S Desktop 3D Printer
-===== Cost To Use =====
-$.10/gram of any used filament (including errors)
-Donation Box next to Device
-===== Notes =====
-You MUST BE TRAINED before using it alone. Ask for help from a member who has been trained;
-contact James Pittman to find the next class or to set up an appointment for your training.
- ===== Specs =====
-  * Type: FFF (Fused Filament Fabrication)
-  * Filament diameter: 1.75mm
-  * Hot end: HYBRID by STACKER
-  * Standard nozzle size: Includes four 0.50mm Mid Temp nozzles
-  * Available nozzle sizes: 0.40, 0.50, 0.80, and 1.00mm
-  * MAX Temp: 300 degrees C
-  * MAX X/Y print area one head printing: 255mm (10″) x 458mm (18″)
-  * MAX X/Y print area two heads printing: 255mm (10″) x 220mm (8.7″)
-  * MAX X/Y print area three heads printing: 255mm (10″) x 138mm (5.46″)
-  * MAX X/Y print area four heads printing: 255mm (10″) x 100mm (3.9″)
-  * MAX Z height print area: 220mm (8.75″)
-  * Layer resolution: .1mm to 1mm or 100 micron to 1000 microns
-  * Positional accuracy for X/Y: 6 microns or .00023″
-  * Positional accuracy for Z: 4 microns or .00015″
-  * Real world print accuracy: .0005″ to .002″ ( depends mostly on filament diameter consistency)
-  * Print speed: 10 to 150mm/s
-  * Travel speed: 0 to 250mm/s
-  * Build plate: tempered glass, sandblasted, removable
-  * Print bed: heated, custom PCB, 250 WATT
-  * Internal Voltage: 24VDC/5VDC
-  * Controller: AZTEEG X3 PRO
-  * Connectivity: USB or SD card
-  * Power supply: Meanwell brand High-Performance Series
-  * Power supply input: 100-240VAC 8.5A
-  * Power supply output: 27A at 24VDC
-  * Operating temperature range: 50-100 deg F (10-38 deg C)
-  * Operating Noise: 35 to 70 dB
-==== Printing Modes ====
-  * STACKER has three print modes: Single-part, Multi-part, and Multi-material
-  * Single-part Mode: Print one part with one print head. For basic one-off printing. Load a part, print it.
-  * Multi-part Mode: Print multiple copies of the SAME EXACT part. This mode only allows you to use one head per part. You can choose if you want to print two copies, three copies, or four copies of your part. Each hot end temperature can be independently adjusted!
-  * Multi-material Mode: Print one part with more than one material type. This mode allows you to extrude multiple materials from more than one hot end onto the same part. Just to be clear, you can only print one part at a time in multi-material mode. Each hot end temperature can be independently adjusted. Example: print main part with head number 1 and support structure with head number 2.
-==== Physical Printer Specs ====
-Width: 675mm (26.5″)
-Height: 400mm (15.75″) (for one full height single stack)
-Depth: 720mm (28″) (with filament rail and roll of filament)
-Weight: 30kg (65lbs) (bare machine with no filament)
-Shipping Box Specs for STACKER Desktop model
-Length: 785mm (31″)
-Width: 665mm (26″)
-Height: 540mm (21″)
-Weight: 39.5kg (87lbs)
-==== Software Specs ====
-  * Host Software: STACKER RUN a custom version of Repetier
-  * Other compatible software: Cura, Slic3r, Pronterface, Simplify3d
-  * Supported file types: STL, OBJ, AMF
-  * Operating system: Windows 32/64 Bit Vista/7/8, Mac OS X 10.6+, Linux 32/64 Bit (Ubuntu 12.04+)
- ===== On loan from =====
-JT Smith
- ===== History =====
-/01/16 - Arrived at Makerspace\\
-/15/16 - Ready to Use
-===== Owner's Manual =====
-Coming Soon...
-===== QR Code =====
-Coming Soon...