The Bodgery Wiki

User Tools

Site Tools

Trace:
rfidsetup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
Last revisionBoth sides next revision
rfidsetup [2015/08/01 19:50] – created Timm Murrayrfidsetup [2015/08/03 21:25] – John Eich
Line 1: Line 1:
 ====== New Member Setup ====== ====== New Member Setup ======
  
-  - Get the RFID reader (black box) and a fresh tag. Plug the reader into the USB port on your computer.+  - Get the RFID reader (black plastic box with a cord) and a fresh tag. Plug the reader into the USB port on your computer.
   - Go to [[https://app.tyrion.thebodgery.org/secure/index.html]] (this is only accessible if you're at the Bodgery and connected to its network) (you will need a username/password to access)   - Go to [[https://app.tyrion.thebodgery.org/secure/index.html]] (this is only accessible if you're at the Bodgery and connected to its network) (you will need a username/password to access)
   - Click "Add New RFID"   - Click "Add New RFID"
   - With typing cursor in  the "RFID Tag #" field, scan the tag. It should put in the tag number just as if it were typed.   - With typing cursor in  the "RFID Tag #" field, scan the tag. It should put in the tag number just as if it were typed.
-    * Check that the tag has 10 digits. If it's doesn't, clear the field and scan again.+    * Check that the tag has 10 digits. If it doesn't, clear the field and scan again.
   - Type in the new member's name   - Type in the new member's name
   - Click the "Add Tag" button   - Click the "Add Tag" button
rfidsetup.txt · Last modified: 2022/05/29 16:01 by 127.0.0.1