Differences

This shows you the differences between two versions of the page.

--- area:woodshop:10insawstop [2024/07/26 15:10] – Changing picture path jsnor351
+++ area:woodshop:10insawstop [2024/07/29 14:41] (current) – [Table Saw, 10" SawStop] jsnor351
@@ Line 1: / Line 1: @@
 ====== Table Saw, 10" SawStop ======
-{{ :area:woodshop:professional-cabinet-saw.jpg?400|}}
+^ Model No: | PCS31230 ||
+^ Owner: | Bodgery ||
+^Blade Diameter: | 10" ||
+^Arbor Diameter: | 5/8" |{{:area:woodshop:professional-cabinet-saw.jpg?300 |}}|
+^Rail Length: | 52" |:::|
+^Tilt: | Left |:::|
+^Certification Required: | **YES** |:::|
-Model No: PCS31230
-Owner: Bodgery
+----
-Blade Diameter: 10"
+====== Rules For Use ======
-Arbor Diameter: 5/8"
+  * Do not operate without proper training.
+  * Always wear appropriate PPE.
+  * Blade Hood is to be used at all times.
+  * Ensure the blade is sharp and properly installed.
+  * Open Blast Gate and turn on dust collection.
+  * Close Blast Gate and turn off dust collection when done.
+  * Keep the work area clean and free of obstructions.
+  * Use push sticks or other aids when it is smart to do so.
+  * Use appropriate sled for your cut.
+  * Turn off and unplug the saw before changing blades.
+  * No recycled, wet, pressure treated lumber, or metal.
+  * Laser cut material and acrylic will trigger brake if not overridden.
+  * If unsure about a material or process; ask area captain.
-Rail Length: 52"
+----
+<WRAP center round safety>
+====== Acceptable Materials ======
+</WRAP>
+  * Hardwood (e.g., oak, maple, walnut)
+  * Softwood (e.g., pine, cedar)
+  * Plywood
+  * MDF (Medium Density Fiberboard)
+  * Particle board
+  * Laminate
-Tilt: Left
+----
-[[https://www.sawstop.com/images/uploads/manuals/Getting_Started_With_SawStop_Cast_Iron.pdf|Getting Started]]
+<WRAP center round danger>
+====== Unacceptable Materials ======
+</WRAP>
+  * Recycled lumber with metal fasteners (e.g., nails, screws)
+  * Wet or damp wood
+  * Pressure-treated lumber
+  * Metal
+  * Acrylic and other plastics (without proper blade and settings)
+  * Laser-cut material (unless properly overridden)
+----
+====== Manufacturer Literature  ======
+{{ :area:woodshop:pcs31230_owners_manual.pdf |Owner's Manual}}
+{{ :area:woodshop:pcs31230_getting_started.pdf |Getting Started}}
+{{ :area:woodshop:pcs31230_fence_assy.pdf |Fence Assembly}}
+{{ :area:woodshop:pcs31230_parts_list.pdf |Parts List}}
+----
-[[https://www.sawstop.com/images/uploads/manuals/PCS%20Owners%20Manual%20Model%20PCS31230%20V5.0%2009-13.pdf|Manual]]