faq
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| faq [2025/05/25 13:12] – Added praying/nursing section, rearranged sections mpickhard | faq [2026/01/14 17:57] (current) – "would" -> "wood", the material z3ugma | ||
|---|---|---|---|
| Line 78: | Line 78: | ||
| * Finishes, including flammable oil-based finishes, may be applied by brush, rag, etc. Do not dispose of oily rags at the Bodgery because of the risk of spontaneous combustion. Instead, put them in a plastic bag and dispose of them at home. | * Finishes, including flammable oil-based finishes, may be applied by brush, rag, etc. Do not dispose of oily rags at the Bodgery because of the risk of spontaneous combustion. Instead, put them in a plastic bag and dispose of them at home. | ||
| - | * Use dust collection devices when sanding, grinding, cutting, etc. Dust is a health concern as well as a cleanliness issue. Power cutting and sanding of would should be done only in the woodshop areas. | + | * Use dust collection devices when sanding, grinding, cutting, etc. Dust is a health concern as well as a cleanliness issue. Power cutting and sanding of wood should be done only in the woodshop areas. |
| * No internal combustion vehicles inside the building. This is a city fire department requirement. The concern is with the fuel tank and fuel vapors. Small engines are OK but must have the fuel tank drained, the engine run dry, then the fuel tank vented (open) outdoors for at least fifteen minutes. | * No internal combustion vehicles inside the building. This is a city fire department requirement. The concern is with the fuel tank and fuel vapors. Small engines are OK but must have the fuel tank drained, the engine run dry, then the fuel tank vented (open) outdoors for at least fifteen minutes. | ||
faq.txt · Last modified: 2026/01/14 17:57 by z3ugma