knotwork
Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
knotwork [2014/12/07 03:11] – created whblondeau | knotwork [2022/05/29 16:01] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
===== Knotwork ===== | ===== Knotwork ===== | ||
+ | |||
+ | // Initial article begun 2014-12-06 by Bill Blondeau// | ||
==== Basic concepts and terms ==== | ==== Basic concepts and terms ==== | ||
Line 29: | Line 31: | ||
---- | ---- | ||
+ | === Classification of knots === | ||
+ | |||
+ | There are three classifications of knots | ||
+ | |||
+ | *__Knots__ A knot is a fastening in which a piece of rope is tied to itself. | ||
+ | |||
+ | *__Hitches__ A hitch is a fastening in which a line is tied to something else, like a post or a ring. An example is a clove hitch a round turn with two half-hitches. | ||
+ | |||
+ | *__Bends__ A bend is a fastening in which a line is tied to another line, typically to extend it. Examples include the sheet bend, or the figure 8 follow through, which is far stronger and less likely to slip than a sheet bend. | ||
+ | |||
+ | ---- | ||
=== What are you tying it to? === | === What are you tying it to? === | ||
Line 35: | Line 48: | ||
Knots can be tied to: | Knots can be tied to: | ||
- | * The line itself, forming a **loop** or **stopknot** (aka stopper). | + | * __The line itself__, forming a **loop** or **stopknot** (aka "stopper"). |
+ | |||
+ | * __The other end of the line__; this is a **binding knot**. Binding knots are monstrously convenient because they are usually “snuggable” (you can tighten them up before finishing them), but they are dangerous because it’s tempting to misuse them. We get accustomed to tying binding knots all the time, and then we find ourselves using them without thinking about it. | ||
+ | |||
+ | * __Another line__: a knot that joins two lines //so that they can handle a strain// is called a **bend**. Only certain knots are referred to as “bends”; | ||
+ | |||
+ | * __A post or hook__ (a rigid structure in which you have the option of passing a bight of line over the end). This kind of knot is called a **hitch**. | ||
+ | |||
+ | * __A spar or ring__ (a rigid structure in which you do **not** have access to the end). This is also called a **hitch**; it just requires different methods of making the hitch. | ||
+ | |||
+ | ---- | ||
+ | |||
+ | ==== The essential working knots ==== | ||
+ | |||
+ | Everybody has opinions about this. Twelve different people who know something about knots would probably come up with twelve different lists. Some would say there are 4 essential knots, some would say 7. Or 13. Or 5. And some people would fly into sputtering indignation because some knot they can't imagine living without didn't make the cut. //FOR THE LOVE OF GOD, WHERE IS THE TIMBER HITCH???// | ||
+ | |||
+ | Here's the Bodgerous list of six. It's based on simple day-to-day practicality, | ||
+ | |||
+ | * **[[# | ||
+ | |||
+ | * **[[# | ||
+ | |||
+ | * **[[# | ||
+ | |||
+ | * **[[# | ||
+ | |||
+ | * **[[#the round_turn_two_half_hitches|Round turn and two half hitches: | ||
+ | |||
+ | * **[[# | ||
+ | |||
+ | Here's specific info on these. | ||
+ | |||
+ | ---- | ||
+ | |||
+ | ==== The Bowline ==== | ||
+ | | {{: | ||
+ | |||
+ | == Virtues == | ||
+ | * Easy to learn | ||
+ | * Easy to see if correct | ||
+ | * Quick to tie | ||
+ | * Can tie one-handed | ||
+ | * Can tie without looking (in the dark, behind your back, etc) | ||
+ | * Won’t slip | ||
+ | * The loop will not tighten under load | ||
+ | * Easy to release - won’t jam | ||
+ | |||
+ | == Disadvantages == | ||
+ | * Can’t tie under load (you need a slack standing part in order to tie a bowline). | ||
+ | * Will shake loose (“shake loose” means line is slack and jostling around, which can work the knot until it comes undone.) Some knots are fairly shakeproof; the bowline is not one of them. In general, plan to use a bowline when the line will remain reliably under tension during the work you’re doing. | ||
+ | * Can capsize under heavy load. This can be a safety issue. | ||
+ | |||
+ | == When to use == | ||
+ | A non-slip loop has so many uses. As you learn and use the bowline, you’ll naturally come to rely on it more and more. Some particular things to think about: | ||
+ | |||
+ | * Hoisting a load. This is a particularly perfect fit: | ||
+ | * You typically begin with a slack line. | ||
+ | * The bowline’s loop can be passed through a shackle, around the body of the load, etc, before tying. | ||
+ | * Once the load is up, the line remains under tension for as long as the lift is happening. | ||
+ | * Once you’re done, the bowline can generally be released without difficulty. | ||
+ | * Hoisting a (conscious) human. Climbers and tall ship sailors both know this very well. If you tie a bowline around your body, the folks up above can hoist - and the line won’t tighten and crunch your chest or hips. | ||
+ | * Load tiedown. If you need a binding knot around something and you need to make it really tight, you can build a cheap and easy equivalent of a trucker’s hitch by putting a bowline in one end. Passing the other end through the bowline’s loop gives you a rough 2:1 mechanical advantage; once tight, the working end can be secured with two half hitches. Some obvious shortcomings here include very rapid rope wear; use with caution. | ||
+ | * A bowline’s loop can be used to make a catspaw (on a hook) or an attachment point for a lark’s head (which is a simple, secure kind of hitch). | ||
+ | |||
+ | === Other bowlines === | ||
+ | The simple bowline is not the most secure variant of the bowline family of knots. You can find safer variants of the bowline. Some of them are easy, some are not; but this list has been put together for day-to-day use. If you're a commercial fisherman or a mountaineering guide, and you are checking //this list// for knotwork basics, may Cthulhu eat you first (that' | ||
+ | |||
+ | === How to tie a bowline === | ||
+ | |||
+ | == The boring and awkward Boy Scout way: == | ||
+ | This **works**. However, it is also the reason that so many people whine, " | ||
+ | |||
+ | {{: | ||
+ | |||
+ | |||
+ | == The Muscle Memory way: == | ||
+ | (video forthcoming) | ||
+ | |||
+ | |||
+ | === How to release a bowline === | ||
+ | One of the best characteristics of a bowline is that you can release it easily, even after it’s been under a lot of strain. This is often called “popping” the bowline, or “breaking its back”. | ||
+ | Popping a bowline cannot be done while under load. However, once the line is slack, popping it is simple: just go to the top of the knot and push it up along the standing part. It will introduce slack into the entire knot, and you’re good. Even a bowline in a hefty rope can be popped by pressing with both thumbs. | ||
+ | |||
+ | |||
+ | ---- | ||
+ | ==== The Figure Eight ==== | ||
+ | |||
+ | |||
+ | ---- | ||
+ | ==== The Sheet Bend ==== | ||
+ | |||
+ | | {{: | ||
+ | |||
+ | === Virtues === | ||
+ | |||
+ | * Simple. | ||
+ | * Very good for joining two lines when one is larger (or less flexible) than the other. | ||
+ | * Strong under load. | ||
+ | * Quick to tie. | ||
+ | * Won’t jam. | ||
+ | |||
+ | === Disadvantages === | ||
+ | * Can work loose if the joined lines are shaking while not under load. | ||
+ | * If the two ends do not end up on the same side of the knot, it’s insecure and will slip. (This is the only real exception to the “not easy to screw up” part.)\\ {{: | ||
+ | * Not suitable for really large ropes or industrial-strength haulage. | ||
- | | + | === When to use it === |
+ | | ||
+ | * In fiber work (another name for the sheet bend is the “weaver’s | ||
+ | | ||
+ | | ||
+ | * Excellent for using a light line to pull the end of a heavy line across a gap: | ||
+ | * Lifting a heavy line to a high place for rigging. | ||
+ | * Crossing a chasm while mountaineering. | ||
+ | * Sending a mooring line to the pier from a ship that’s docking. | ||
- | * Another line: a knot that joins two lines //so that they can handle a strain// is called a **bend**. Only certain knots are referred | + | === How to tie === |
+ | This video is kind of nice because | ||
- | * A post or hook (a rigid structure in which you have the option of passing a bight of line over the end). This kind of knot is called | + | === How to release == |
+ | Once the load is off, it's pretty easy to see how to release | ||
- | * A spar or ring (a rigid structure | + | === The Double Sheet Bend === |
+ | For increased security, and as a general rule when one of the lines is considerably smaller or slinkier than the other, throw an extra wrap around the bend in the bigger line. It’s pretty easy to see how, and to understand why, by inspection. If in doubt about how to do it, see this video. | ||
knotwork.1417921919.txt.gz · Last modified: 2022/05/29 16:01 (external edit)