The Bodgery Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Router Table with Rockler Tabletop & Router Lift, Jessem Fence and Porter Cable 75182 Router Motor======

{{ :equipment:woodshop:router-table_rockler_image.jpg?200|}}

Owner: Bodgery 

Router Table Top Manufacturer: Rockler

Router Table Top Dimensions: 24 in. x 32 in. x 1-1/8 in.

Router Table Fence Manufacturer/Model: Jessem/04001 Mast-R-Fence

Router Table Lift Manufacturer/Model: Rockler/Pro Lift

Router Motor Manufacturer/Model: Porter Cable/75182 motor only

Router Motor Speed Range: 10,00 RPM to 21,000 RPM

Router Motor Caution (per page 8 of router motor's manual):
DON’T USE router bits with a diameter in excess of 2-1/2"
except when using Model 75182 motor set for either
10,000 or 13,000 RPM. Router bits with a diameter up to 3" may be used
with the 75182 motor operating in the 10,000 or 13,000 RPM speeds.
Router bits with a diameter up to 3-1/2" may be used with the 75182 motor
operating in the 10,000 RPM speed.  

Also research and refer to router bit manufacturer's recommended speeds for large diameter bits.

{{ :equipment:woodshop:router-table_router-lift_rockler-pro-lift-inst-52429_manual.pdf |Rockler Router Pro Lift Manual (16.3 MB)}}

{{ :equipment:woodshop:router-table_router-motor_porter-cable_75182-manual.pdf |Porter Cable 75182 Router Motor Manual (436.7 KB)}}

{{ :equipment:woodshop:router-table_router-fence_jessem_04001-mastrfence.pdf |Jessem 04001 Mast-R-Fence Parts List & Installation Manual (498 KB)}}

{{ :equipment:woodshop:router-table_rockler-router-top_manual.pdf |Rockler Router Table Top}}