====== Table Saw, 10" SawStop ======

^ Model No: | PCS31230 ||
^ Owner: | Bodgery ||
^Blade Diameter: | 10" ||
^Arbor Diameter: | 5/8" |{{:area:woodshop:professional-cabinet-saw.jpg?300 |}}|
^Rail Length: | 52" |:::|
^Tilt: | Left |:::|
^Certification Required: | **YES** |:::|


----

====== Rules For Use ======

  * Do not operate without proper training.
  * Always wear appropriate PPE. 
  * Blade Hood is to be used at all times.
  * Ensure the blade is sharp and properly installed.
  * Open Blast Gate and turn on dust collection. 
  * Close Blast Gate and turn off dust collection when done.
  * Keep the work area clean and free of obstructions.
  * Use push sticks or other aids when it is smart to do so.
  * Use appropriate sled for your cut.
  * Turn off and unplug the saw before changing blades.
  * No recycled, wet, pressure treated lumber, or metal. 
  * Laser cut material and acrylic will trigger brake if not overridden.
  * If unsure about a material or process; ask area captain.

----
<WRAP center round safety> 
====== Acceptable Materials ======
</WRAP>
  * Hardwood (e.g., oak, maple, walnut)
  * Softwood (e.g., pine, cedar)
  * Plywood
  * MDF (Medium Density Fiberboard)
  * Particle board
  * Laminate

----

<WRAP center round danger>
====== Unacceptable Materials ======
</WRAP>

  * Recycled lumber with metal fasteners (e.g., nails, screws)
  * Wet or damp wood
  * Pressure-treated lumber
  * Metal
  * Acrylic and other plastics (without proper blade and settings)
  * Laser-cut material (unless properly overridden)

----

====== Manufacturer Literature  ======

{{ :area:woodshop:pcs31230_owners_manual.pdf |Owner's Manual}}

{{ :area:woodshop:pcs31230_getting_started.pdf |Getting Started}}

{{ :area:woodshop:pcs31230_fence_assy.pdf |Fence Assembly}}

{{ :area:woodshop:pcs31230_parts_list.pdf |Parts List}}


----