The Bodgery Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Bodgery Equipment =====

Certain tools require membership and Bodgery training to use. Check the list below for details:
  * [[equipment:Tools and Equipment|Tool Privilege & Access]] - Tools sorted by member and guest access.

Many of our tools require design or operating software to use. The following page has a list of free or open source software.
    * [[equipment:Software|Software]]



----


===== CNC/Fab Lab =====
//Area Captains: James Pittman//

//Email: cnc@thebodgery.org//

  * [[equipment:laser_cutter_150w|Laser Cutter/Engraver 150w]]
  * [[equipment:laser_cutter_50w|Laser Cutter 50w]]
  * [[equipment:cnc_router_carvey|CNC Router: Inventables "Carvey"]]
  * [[equipment:cnc_router_techno|CNC Router: Techno LC Series 4896]]
  * [[equipment:tormach440|Tormach PCNC 440: Metal Mill]] in Machining area
  * [[equipment:vinyl_cutter|Vinyl Cutter]] in Craft area
  * PFAFF Creative Vision CNC embroidery machine


----


===== CAD (Computer Aided Design) Resources =====
  * [[cad-resources|Our wiki page on CAD resources]]


----


===== 3D Printing =====
//Area Captains: Peter Liethen, Rob Smeaton//

//Email: 3dprinting@thebodgery.org//

There is an introduction to 3D printing called “3D Printing 101” that you can find here:
https://drive.google.com/file/d/1L4aX1oNZq0MgHx-fUiHGoEfWh8zdeU2Z/view

These are the printers we own, and will train you to use.
  * [[equipment:3D Printer: Ender 3|3D Printer: Ender 3]] [[http://ender3-1.3d.thebodgery.org/]]
  * [[equipment:3D Printer: FolgerTech FT5|3D Printer: FolgerTech FT5]] [[http://ft5-1.3d.thebodgery.org/]]
  * [[equipmemt:3D Printer: Prusa Mini|3D Printer: Prusa Mini]] [[http://prusamini-1.3d.thebodgery.org/]]
  * [[equipment:3D Printer: FolgerTech FT6|3D Printer: FolgerTech FT6]] [[http://ft6.3d.thebodgery.org/]]
 
All these 3D printers, and what’s unique about the use of each one, can be found at the end of this presentation: https://docs.google.com/presentation/d/1wGjaNjzRAw9JA2sqPl3q3w_RRvoSv04j/view

**Materials**
Only 3 filament types are kept at The Bodgery
and Other Filament Types may be used at the Area Captain's Discretion:
  * PLA (or its derivative, PLA+ or Pro)
  * PETG
  * TPU (with a Shore hardness rating of 95A)
All printers use filament diameter 1.75mm
If you want to print a different material on our printers, you MUST contact an area captain first. You can reach us at email [[3dprinting@thebodgery.org]], or post your request on Slack in the #3d-printing channel.

**Cost**
  * $0.06/g if you use filament supplied by The Bodgery;
  * $0.03/g if you use your own.
  * Weigh your print(s) on the provided scale and either:
    * Insert the cash for it in the payment box, or
    * Send a payment through PayPal to: **treasurer@thebodgery.org** and note that it's for 3D filament.

**Colors**: We try to keep a variety of colors of each filament type on hand. We will not buy filament on request, except when we are making a replenishment order. When that occurs, we ask on Slack if specific colors are desired.


----


===== Wood Shop =====
//Area Captains: Jim Fortner, ...//

//Email: woodshop@thebodgery.org//

  * [[equipment:tablesaw_sawstop|Table Saw, 10" 3hp SawStop]]
  * [[equipment:tablesaw_steelcity|Table Saw, 10" 1.75hp Steel City]]
  * [[equipment:Craftsman-14in-band-saw|Band Saw, Craftsman 14"]] (floor standing) 
  * [[equipment:Band-saw-9in-Ryobi|Band Saw, 9" Ryobi 1/2 hp]] (tabletop)
  * [[equipment:drillpress_shopfox_w1668|Drill Press, 3/4 hp Shop Fox]] (tabletop)
  * [[equipment:Sliding Miter Saw, 10" Craftsman|Sliding Miter Saw, 10" Craftsman]]
  * [[equipment:Scroll Saw, Delta|Scroll Saw, Delta]]
  * [[equipment:shaper_powermatic27|Shaper, Powermatic Model 27]]
  * [[equipment:pocketHoleCutter_CastleTSM12|Pocket Hole Cutter, Castle Model TSM-12]]
  * [[equipment:mortiser_powermatic10|Mortiser, Powermatic Vintage, Model 10]]
  * [[equipment:Wood Lathe, 12" diameter Craftsman|Craftsman Wood Lathe]]
  * Planer, 20" Grizzly, Model G1033X [[https://cdn0.grizzly.com/manuals/g1033x_m.pdf|manual]]
  * [[equipment:Ryobi-Planer|Planer, 13" Ryobi Model AP1300/AP1301]]
  * Belt & Disc Sander, 4" Ryobi
  * Circular Saws, Jig Saws, Cordless/Corded Hand Drills
  * Hand Sanders, Sanding Station with [[equipment:sander_beltDiskBenchSander|Bench Top Belt/Disk Sander, Ryobi]]
  * Routers, Dremels/Rotary Tools
  * Small Hand Tools, hand planers, etc.
  * [[equipment:wetDryVac|Wet/Dry Vacuum, Shop Vac, 12gal, 5hp]]
  * Specialty Tools
    * Doweling Jig
    * Pockethole Jig (Kreg R3)
    * Downdraft Table
    * Biscuit Cutter (on loan from Paul Hansen)
    * Drill Doctor


----


===== Metal Shop/Welding =====
//Area Captains: Randy Nelson, Adam Jablonski//

//Email: metalshop@thebodgery.org//


  * Millermatic 180 MIG welder, with .030 wire and 75/25 gas mixture
  * Miller 165 TIG welder, AC/DC and argon gas 
  * Eastwood dual process Tig/Stick welder
  * Hypertherm Plasma Cutter with a handheld torch
  * Dewalt porta-bandsaw mounted to a SWAG Offroad table
  * [[equipment:metal_bandsaw|Horizontal/Vertical Bandsaw]], 64 1/2" 14T mild steel blade 
  * Evolution Metal Chop Saw, 14" Dry cut
  * Bench Grinders, 8“ and 6"
  * Angle grinders, 4 1/2”, members are encouraged to supply their own disks or replenish 
  * Bench Vise
  * Delta Drill press, with vises and limited bits 
  * Grizzly belt sander, 2"x72" belts, members are encouraged to supply their own belts or replenish 
  * Two Blasting cabinets, glass bead and coal slag
  * Two Auto-darkening welding helmets, gloves, shield, apron, jackets. Member PPE is encouraged when possible.
  * Oxy/Acetylene torch on two-wheel cart
  * 3ft x 4ft x 3/8" steel welding table
  * Available upon request:
    * Teardrop hammers (sheet metal forming) 

=== SheetMetal ===

  * Teardrop hammers (sheet metal forming). Available upon request
  * English wheel, limited to 16 gauge steel, 14 gauge copper, and aluminum
  * Stomp shear, limited to 16ga material, vintage
  * KLUTCH Box and Pan Brake  48in., limitations written on the brake
  * [[equipment:12in_benchtop_shear| KLUTCH 12" Straight Benchtop Plate Shear]] (with limitations written on the shear)
  * Handheld sheet metal snips and various hand tools
  * Spot welder

=== Metal Bending ===

  * Shop Outfitters Ring roller, for flat bar and 3/8” rod
  * SWAG Offroad Ring roller, for flat bar of various widths (the hard way), Various dies available from mfg.
  * Hossfeld Model No. 2 Universal Bender (manual), with various dies
  * Manual rebar bender, 3/4" max
  * Powered Benner Nawman rebar bender, 3/4" max 
  * 12-ton H-Frame Floor Shop Press
  * Two manual conduit/EMT benders


----


===== Blacksmithing =====
//Area Captains: Available//

//Email: blacksmithing@thebodgery.org//

<WRAP center round important 60%>
NOTE: This area is not currently available for use.
</WRAP>


  * Propane Forge, Single Burner
  * Anvil, 215 lbs.
  * Anvil, 75 lbs.
  * Engineer's Hammer, 3 lbs.
  * Cross-pein Hammer, 3 lbs.
  * Ball-pein Hammer, 1/2 lbs.
  * Tongs, Bolt, Large
  * Tongs, 1 1/2 inch Round
  * Tongs, 3 inch Round Jaw
  * Casting ladle
  * 4 Cast-iron Casting pans


----


===== Machine Shop =====
//Area Captains: Bill Cogger, Steve Howe, Mark M (assistant)//

//Email:  machineshop@thebodgery.org//

  - Metal Lathes
    - South Bend Heavy 10"
      * DRO installed (though not very accurate)
      * Quick-change tool post
      * Tail-stock accepts Morse Taper 2
    - South Bend 13"
      * Quick-change tool post
      * Tail-stock accepts Morse Taper 3
    - Chucks
      * 3-jaw chuck
      * 4-jaw chuck
      * 6-jaw chuck
      * collet chuck
      * steady rest in various states
    - Assortment of carbide-insert and HSS tooling
  - Band Saws
    - Wilton Vertical 14" (Model 8201)
    - Grizzly Horizontal (Model 60561)
  - Milling Machines
    - Grizzly Vertical Mill (Model G9902)
      * DRO installed (and quite accurate)
      * Bridgeport-style knee mill
      * Accepts R8 tooling/collets
    - [[equipment:tormach440|Tormach PCNC 440 CNC Metal Mill]]
      * Max travel
        * X: 10"
        * Y:  6"
        * Z: 10"
      * Max spindle RPMs
        * 10000 RPM
      * Uses ER40 tooling
      * Pneumatic drawbar
      * Plexiglass enclosure
      * Variety of tooling available
      * Haimer probe available
      * Z tool-height setter switch
    - Grizzly Mill/Drill (Model G0463)
    - Grizzly Rotary Table (Model 250)
    - Rotary indexer + tail-stock available
    - Variety of 
      * End-mills
      * Fly-cutters
      * Drills
      * Parallels
      * Clampsets
      * Stops
      * etc
  - Drill Press
    - Grizzly 17" Floor Model (Model G7947)
  - Grinder
    - Dewalt Bench Grinder (Model DW756)
      * As of 04/2023: has wire wheel and coarse grinding wheel
  - Buffer
    - Dayton 10" Buffer (Model 3NYA6) 
      * As of 04/2023: has scotch-brite wheel and buffing wheel
  - Metrology 
    * NOTE: all metrology equipment has seen some use and is in somewhat unknown condition
    - Mitituyo Grade AA Granite Surface Plate
    - (Unknown) Grade B Granite Surface Plate
    - Height gauge available with training
    - Grizzly 0-6" Micrometer set (with standards), available with training
    - Dial indicators with magnetic stands 
      * These are not in the best condition but good enough for most work
    - Indocol mill spindle clamp for dial test indicators
    - Assortment of gauges/standards 
      * Thread gauges
      * Telescoping bore gauges
      * etc

----


===== Plastics =====
//Area Captain: Karen Corbeill//


  * Purple t-shirt press
  * Toaster Oven 
  * Page laminator
  * Craft-style heat gun
  * Wen rotary tool + bits
  * Scroll saw (owner: Karen)
  * Tabletop bandsaw
  * Large vertical bandsaw with 12” throat (owner: Karen)
  * Drill press + full set of drill bits
  * Cordless Dewalt drill
  * Large vacuum former
  * Small vacuum former (owner: Johnny Yan, machine currently stored in 3D printing)
  * Small diameter wood chipper/plastic shredder
  * Tabletop hot wire knife
  * Handheld hot knife
  * Handheld hot wire knife
  * Hot glue gun
  * UV flashlight
  * 2x small space heaters (for resin curing)
  * Steel file sets (large and needle)
  * Acrylic sheet cutter/blade
  * Aviation shears
  * Laser thermometer gun
  * Small griddles and mug warmers
  * Modified paper/plastic shredder (owner: Johnny Yan)


----


===== Electronics Lab =====
//Area Captain: Timm Murray, Marshall Scholz, Jack Ryan//

//Email: electronics@thebodgery.org//

  * Soldering Irons, Soldering Station
  * Toaster Oven Reflow Soldering Station
  * USB Soldering Microscope
  * Handheld Multimeters
  * Tektronix TDS 210 Digital Real-time Oscilloscope
  * Tektronix 2245A Analog Oscilloscope
  * BK Precision 1650 Tri-Ouput Power Supply
  * Battery Terminal Spot Welder
  * Components and Supplies
  * Solder sucker
  * Wire cutters, Wire strippers
  * Helping Hands
  * Cables and Cords
  * Available Upon Request
     * Ultrasonic Cleaner
  * Commodore 64


----


===== Computer Lab =====
//Area Captain: Mark Pickhard//
  * [[Classroom Computers]]
  * [[ClassroomPrinter|Classroom Printer]]
  * [[Doorbot]]


----


===== Craft =====
//Area Captain: Sylvia Lieteau//

//Email: craft@thebodgery.org//

===Sewing & Fabrics=== 
  * Sewing Machines
     * Janome HD-3000
     * [[Seiko - STH-8BLD-3]]
  * White Superlock 634D Serger
  * PFAFF Creative Vision CNC embroidery machine 
     * [[http://www.pfaff.com/SiteMedia/PFAFF/Products/Machines/Support-manuals/creative_vision_5_5-manual-EN.pdf|Manual]]
     * [[http://www.pfaff.com/SiteMedia/PFAFF/Products/Machines/creative-line/technique%20book/creative-vision-technique-book-EN.pdf|Techniques]]
     * [[https://youtu.be/y5pfLOWcUL8]|Video tutorial]])
  * Steamer
  * Irons & Ironing Boards
  * Leather punch, Riveter
  * 3 Female Dress forms
  * Sleeve Board (ironing)
  * Ironing Ham

===Software===
  * CNC Embroidery:
    *Hatch Embroidery - [[https://hatchembroidery.com/|Hatch website]]

===Yarn===
  * Center-pull yarn winder
  * Yarn Swift
  * Crochet Hooks & Knitting Needles (US sizes 0 to 10, some assorted larger sizes + DPNs + circulars)
  * ALL THE YARN!

===Papercraft/Art=== 
  * Cricut Explore Air ([[http://learn.cricut.com/explore-air/manuals|manuals]])
  * Rotary & Guillotine paper cutters
  * Acrylic Paint

===Misc===
  * Electric engraver
  * Glass Cutters, Heat Gun
  * Hot glue guns
  * Small, medium, and large cutting mats
  * Wax Melter
  * Candle making Supplies
  * Light Box
  * Jewelry Displays (Available for member check-out)


----


===== General =====
  * [[equipment:small_power_tools|Small Power Tools]]
  * Hand Tools
  * Small Bolt Cutters
  * Shop Vacs/Dust Removal
  * Screw Compressor - 150 max psi, 17gal, 1.7hp
    * Compressed air pumped to:
      - [[area:woodshop|Woodshop]]
      - [[area:woodlathes|Wood Turning]]
      - [[area:classroom:shop|Shop Classroom]]
      - [[area:cnc:router|CNC Router]]
      - [[area:metalshop|Metalworking]]
      - [[area:plastics|Plastics]]
      - [[area:machineshop|Machining]]
      - [[area:loadingarea|Loading Area]]
      * More extensions planned for the future
 

----


=====Entertainment=====
  * Viewsonic TV
  * Samsung DVD Player
  * Roku (Youtube, Pandora, etc.)
  * Projector & Screen
  * Overhead Projector
  * Inkjet Printer


----


===== Specialty Tools =====
   * Monocular Microscope
   * Kiln (Glass fusing)


----


====Kids====
  * Brain Box 500 (snap together circuits)
  * Capsela 1000 Science Discovery System
  * Little Bits Starter Kit
  * Coinstruction Kit
  * Pony Beads
  * General art supplies
  * K'nex
  * Zome DNA Builder Kit
  * Duplos
  * D-stix
  * Pattern Blocks
  * Legos
  * Tangrams


----


====Games====
  * Cranium
  * Yahtzee
  * Boggle
  * Jenga
  * Cribbage
  * Cornhole


----


==== Defunct, Missing, or Removed Equipment ====
  * Firenado Machine (Missing, Presumed Escaped)