The Bodgery Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Laser Cutter/Engraver 50w ======
~~NOTOC~~
{{ :equipment:laser_cutter50w.jpg?400|}}

===== Make/Model ===== 
Shenhui SH-350D

===== Cost To Use =====
$10/hr of cutting time\\
Donation Box next to Device


===== Notes =====
You MUST BE TRAINED before using it alone. Ask for help from those who have been trained, and\\
Contact James Pittman to set up an appointment for your training.


{{ :equipment:laser_cutter:lasercutterorientation.pdf |Laser Cutter Handout}}

[[equipment:laser_cutter_50w_tutorial|Settings and tutorial]] on using it.

[[https://www.youtube.com/playlist?list=PLeKaKWOIPgi_XP6Nxzeapp-vUMCLQyVMB|Informative video series by Russ of Sabar Multimedia]]



 ===== Specs ===== 

  * Laser power: 50W 
  * Laser type: Hermetic CO2 glass tube
  * Cylinder Rotary Attachment
  * Supports graphic formats (PLT, DXF, BMP, JPG, GIF, PGN, TIF).
  * Equipped with DSP Control System 
    * Compatible software: CorelDraw, AutoCAD
  * Compatible with WIN7/Vista/XP 
  * Power supply： AC220±10% 50HZ/ AC110±10% 50HZ
  * Working area: 300mm X 500mm (Approx. 11.81" x 19.68")
  * Max moving speed: 500mm/s
  * Locating precision: <0.01mm
  * Min shaping character: Character: 2x2mm, Letter: 1x1mm
  * Operating temperature: 5-40 degrees Celsius
  * Resolution ratio: ≤4500dpi
  * Control configuration: DSP
  * Data transfer interface: USB(offline)
  * Cooling: Water Cooling and protection system
  * Dimensions： 1020×650×630 mm
  * Net Weight: 65KG


 ===== Material Information ===== 
[[http://www.synrad.com/synradinside/pdfs/LaserProcessingGuide_Plastics.pdf|Plastics Guide]]


 ===== On loan from ===== 
JT Smith


 ===== History ===== 
08/08/14 - Arrived at Makerspace\\
08/29/14 - Ready to Use



===== Owner's Manual =====
{{:equipment:lasercutter50w_sh350dmanual.pdf|}}



===== QR Code =====

Coming Soon...