• Do not operate without proper training.
• Always wear appropriate PPE.
• Blade Hood is to be used at all times.
• Ensure the blade is sharp and properly installed.
• Open Blast Gate and turn on dust collection.
• Close Blast Gate and turn off dust collection when done.
• Keep the work area clean and free of obstructions.
• Use push sticks or other aids when it is smart to do so.
• Use appropriate sled for your cut.
• Turn off and unplug the saw before changing blades.
• No recycled, wet, pressure treated lumber, or metal.
• Laser cut material and acrylic will trigger brake if not overridden.
• If unsure about a material or process; ask area captain.

• Hardwood (e.g., oak, maple, walnut)
• Softwood (e.g., pine, cedar)
• Plywood
• MDF (Medium Density Fiberboard)
• Particle board
• Laminate

• Recycled lumber with metal fasteners (e.g., nails, screws)
• Wet or damp wood
• Pressure-treated lumber
• Metal
• Acrylic and other plastics (without proper blade and settings)
• Laser-cut material (unless properly overridden)

Owner's Manual

Getting Started

Fence Assembly

Parts List