Differences

This shows you the differences between two versions of the page.

--- equipment [2023/02/25 01:01] – [Metal Shop/Welding] Shawn Southard
+++ equipment [2023/05/03 00:56] (current) – Shawn Southard
@@ Line 135: / Line 135: @@
 === SheetMetal ===
-  * Central Forge [[equipment:throatless_shear|Throatless Shear]] mounted on bench
-  * [[equipment:12in_benchtop_shear| KLUTCH 12" Straight Benchtop Plate Shear]]
+  * Teardrop hammers (sheet metal forming). Available upon request
-  * Handheld sheet metal shears and various hand tools
+  * English wheel, limited to 16 gauge steel, 14 gauge copper, and aluminum
-  * Shop Outfitters Ring roller, for flat bar and 3/8" rod
+  * Stomp shear, limited to 16ga material, vintage
+  * KLUTCH Box and Pan Brake  48in., limitations written on the brake
+  * [[equipment:12in_benchtop_shear| KLUTCH 12" Straight Benchtop Plate Shear]] (with limitations written on the shear)
+  * Handheld sheet metal snips and various hand tools
+  * Spot welder
+=== Metal Bending ===
+  * Shop Outfitters Ring roller, for flat bar and 3/8” rod
   * SWAG Offroad Ring roller, for flat bar of various widths (the hard way), Various dies available from mfg.
+  * Hossfeld Model No. 2 Universal Bender (manual), with various dies
+  * Manual rebar bender, 3/4" max
+  * Powered Benner Nawman rebar bender, 3/4" max
+  * 12-ton H-Frame Floor Shop Press
+  * Two manual conduit/EMT benders
@@ Line 150: / Line 163: @@
 //Email: blacksmithing@thebodgery.org//
+<WRAP center round important 60%>
 NOTE: This area is not currently available for use.
+</WRAP>
   * Propane Forge, Single Burner
@@ Line 173: / Line 189: @@
 //Email:  machineshop@thebodgery.org//
-  * [[equipment:metal_lathe|Metal Lathe]] (10" Logan)
+  - Metal Lathes
-  * [[equipment:tormach440|Tormach PCNC 440: Metal Mill]]
+    - South Bend Heavy 10"
-  * Manual Metal Mill
+      * DRO installed (though not very accurate)
+      * Quick-change tool post
+      * Tail-stock accepts Morse Taper 2
+    - South Bend 13"
+      * Quick-change tool post
+      * Tail-stock accepts Morse Taper 3
+    - Chucks
+      * 3-jaw chuck
+      * 4-jaw chuck
+      * 6-jaw chuck
+      * collet chuck
+      * steady rest in various states
+    - Assortment of carbide-insert and HSS tooling
+  - Band Saws
+    - Wilton Vertical 14" (Model 8201)
+    - Grizzly Horizontal (Model 60561)
+  - Milling Machines
+    - Grizzly Vertical Mill (Model G9902)
+      * DRO installed (and quite accurate)
+      * Bridgeport-style knee mill
+      * Accepts R8 tooling/collets
+    - [[equipment:tormach440|Tormach PCNC 440 CNC Metal Mill]]
+      * Max travel
+        * X: 10"
+        * Y:  6"
+        * Z: 10"
+      * Max spindle RPMs
+        * 10000 RPM
+      * Uses ER40 tooling
+      * Pneumatic drawbar
+      * Plexiglass enclosure
+      * Variety of tooling available
+      * Haimer probe available
+      * Z tool-height setter switch
+    - Grizzly Mill/Drill (Model G0463)
+    - Grizzly Rotary Table (Model 250)
+    - Rotary indexer + tail-stock available
+    - Variety of
+      * End-mills
+      * Fly-cutters
+      * Drills
+      * Parallels
+      * Clampsets
+      * Stops
+      * etc
+  - Drill Press
+    - Grizzly 17" Floor Model (Model G7947)
+  - Grinder
+    - Dewalt Bench Grinder (Model DW756)
+      * As of 04/2023: has wire wheel and coarse grinding wheel
+  - Buffer
+    - Dayton 10" Buffer (Model 3NYA6)
+      * As of 04/2023: has scotch-brite wheel and buffing wheel
+  - Metrology
+    * NOTE: all metrology equipment has seen some use and is in somewhat unknown condition
+    - Mitituyo Grade AA Granite Surface Plate
+    - (Unknown) Grade B Granite Surface Plate
+    - Height gauge available with training
+    - Grizzly 0-6" Micrometer set (with standards), available with training
+    - Dial indicators with magnetic stands
+      * These are not in the best condition but good enough for most work
+    - Indocol mill spindle clamp for dial test indicators
+    - Assortment of gauges/standards
+      * Thread gauges
+      * Telescoping bore gauges
+      * etc
+----
+===== Plastics =====
+//Area Captain: Karen Corbeill//
+  * Purple t-shirt press
+  * Toaster Oven
+  * Page laminator
+  * Craft-style heat gun
+  * Wen rotary tool + bits
+  * Scroll saw (owner: Karen)
+  * Tabletop bandsaw
+  * Large vertical bandsaw with 12” throat (owner: Karen)
+  * Drill press + full set of drill bits
+  * Cordless Dewalt drill
+  * Large vacuum former
+  * Small vacuum former (owner: Johnny Yan, machine currently stored in 3D printing)
+  * Small diameter wood chipper/plastic shredder
+  * Tabletop hot wire knife
+  * Handheld hot knife
+  * Handheld hot wire knife
+  * Hot glue gun
+  * UV flashlight
+  * 2x small space heaters (for resin curing)
+  * Steel file sets (large and needle)
+  * Acrylic sheet cutter/blade
+  * Aviation shears
+  * Laser thermometer gun
+  * Small griddles and mug warmers
+  * Modified paper/plastic shredder (owner: Johnny Yan)
@@ Line 189: / Line 303: @@
   * Toaster Oven Reflow Soldering Station
   * USB Soldering Microscope
-  * Camp Fridge
   * Handheld Multimeters
   * Tektronix TDS 210 Digital Real-time Oscilloscope
   * Tektronix 2245A Analog Oscilloscope
   * BK Precision 1650 Tri-Ouput Power Supply
+  * Battery Terminal Spot Welder
   * Components and Supplies
   * Solder sucker
@@ Line 218: / Line 332: @@
 ===== Craft =====
-//Area Captains: Cassie Brown, Sylvia Lieteau//
+//Area Captain: Sylvia Lieteau//
 //Email: craft@thebodgery.org//
@@ Line 225: / Line 339: @@
   * Sewing Machines
      * Janome HD-3000
-     * Belvedere Adler
-     * White 734
-     * Singer  - Old - AR736262
-     * Kenmore - Old
      * [[Seiko - STH-8BLD-3]]
   * White Superlock 634D Serger
-  * PFAFF Creative Vision CNC embroidery machine ([[http://www.pfaff.com/SiteMedia/PFAFF/Products/Machines/Support-manuals/creative_vision_5_5-manual-EN.pdf|Manual]],[[http://www.pfaff.com/SiteMedia/PFAFF/Products/Machines/creative-line/technique%20book/creative-vision-technique-book-EN.pdf|Techniques]],[[https://youtu.be/y5pfLOWcUL8]|Video tutorial]])
+  * PFAFF Creative Vision CNC embroidery machine
-  * Brother SE-400 CNC embroidery machine
+     * [[http://www.pfaff.com/SiteMedia/PFAFF/Products/Machines/Support-manuals/creative_vision_5_5-manual-EN.pdf|Manual]]
-  * Simplicity Felting Machine
+     * [[http://www.pfaff.com/SiteMedia/PFAFF/Products/Machines/creative-line/technique%20book/creative-vision-technique-book-EN.pdf|Techniques]]
+     * [[https://youtu.be/y5pfLOWcUL8]|Video tutorial]])
   * Steamer
   * Irons & Ironing Boards
@@ Line 253: / Line 364: @@
 ===Papercraft/Art===
   * Cricut Explore Air ([[http://learn.cricut.com/explore-air/manuals|manuals]])
-  * Mini laminator
   * Rotary & Guillotine paper cutters
   * Acrylic Paint
@@ Line 276: / Line 386: @@
   * Small Bolt Cutters
   * Shop Vacs/Dust Removal
-  * Air Compressor - 150 max psi, 17gal, 1.7hp
+  * Screw Compressor - 150 max psi, 17gal, 1.7hp
+    * Compressed air pumped to:
+      - [[area:woodshop|Woodshop]]
+      - [[area:woodlathes|Wood Turning]]
+      - [[area:classroom:shop|Shop Classroom]]
+      - [[area:cnc:router|CNC Router]]
+      - [[area:metalshop|Metalworking]]
+      - [[area:plastics|Plastics]]
+      - [[area:machineshop|Machining]]
+      - [[area:loadingarea|Loading Area]]
+      * More extensions planned for the future