Monoprice Maker Select Pro Ultimate 3D Printer
Rebadge of the Wanhao Duplicator 6
Model Number: 15710

$.10/gram of any used filament (including errors)
Donation Box next to Device

You MUST BE TRAINED before using it alone. Ask for help from a member who has been trained;

• Type: FFF (Fused Filament Fabrication)
• Filament diameter: 1.75mm
• Hot end: MK11 Direct Drive
• Nozzle size: 0.4mm
• MAX Temp: 260 degrees C
• MAX X/Y print area: 200mm x 200mm
• MAX Z height print area: 185mm
• Layer resolution: .02mm to .2mm (20 micron to 200 microns)
• Positional accuracy for X/Y: 12.5 microns
• Positional accuracy for Z: 5 microns
• Print speed: Up to 150mm/s
• Travel speed: Up to 350mm/s
• Build plate: Cast aluminium with build surface
• Print bed: Heated - MAX Temp: 100C
• Internal Voltage: 24VDC/5VDC
• Connectivity: USB or SD card
• Power supply input: 120VAC 4A
• Average Operational Noise: 49 dBA
• Weight: 30.6 lbs. (13.9 kg)
• SD Card Requirements: SD™ only (not SDHC™), FAT16 or FAT32 formatting, 8 GB maximum capacity

• ABS
• PLA
• PVA
• HIPS
• TPE/TPU Flexables

NOTE: Absolutely no abrasive filaments may be used, such as carbon fiber fill, wood fill, metal fill or glow in the dark plastics. These materials will quickly destroy the hot end nozzle.

Coming soon…

Monoprice Maker Select Pro Ultimate 3D Printer - User's Manual (May 9, 2017)

Peter Liethen

2017-07-07 - Arrived at Makerspace
2017-10-13 - Installed Micro Swiss all metal hot end and improved layer cooling system
2017-11-08 - Ready for use