This is an old revision of the document!

Hand Held Mortiser, Festool DF500

(Picture here)

Manufacturer: Festool

Model: DF500

Owner: Bodgery

Idle engine speed: 24300 RPM

Mitre routing angle range: 0 - 90 °

Max. routing depth: 1-1/16“ (28 mm)

Dust extraction connection dia.: 1-1/16” (27 mm)

Weight: 7.72 lbs (3.5 kg)

Routing height adjustment: 1/8“ (5 mm) - 1-3/16” (30 mm)

Cable length: 13.123 ft (4 m)

DOMINO slot cutter dia.: 3/16“ (4 mm)/1/8” (5 mm)/1/4“ (6 mm)/5/16” (8 mm)/3/8“ (10 mm)

Depth stop for routing depth: 12, 15, 20, 25, 28 mm

Function:

The Domino Joiner can be described as a hand held loose tenon slot mortising machine. The Domino joiner can cut slot mortises in work pieces that are to be joined. Glue and a loose tenon are inserted into the mating mortises, joining the pieces together and creating the (loose tenon) Domino joint.
Mortise width adjustment, with the turn of a dial, allows for easier alignment when joining panels.
Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
Domino cutters of different diameter thicknesses can be used to create mortises of different width, height and depth.
Mortise width setting should only be changed when machine is running.
Dust collector hose must be connected and used at all times when machine is running.