space_improvements
This is an old revision of the document!
Projects Needing Done
You too can make our makerspace!
If you think of something that you think needs to be done, please add it to this list. Also, please help complete items on this list, if you have the time.
- Purchase 4×8 sheet of white board (Home Depot, cheap), cut to length to cover back of tool wall.
- Build lockable Donation/Materials Fees Boxes for
- Main door, Laser Cutter, Vinyl Cutter, Welding area, Fridge
- Buy/install flip-down door-stop for main exterior door
- Create a doorbell.
- Create a switch in the shop that posts an “Open Shop” message to the internet.
- Install a camera that can post snapshots of the shop to the website.
- Sort hardware in parts bins.
- Re-label tool drawers - reorganize if necessary.
Buy/install 4×4 post to replace loft tree/log on outer corner of loftBuild rolling wall between lounge/underloft and sink area.Install barrel bolts to side posts (top and bottom) to keep stable.
- Build a frame for the welding curtain. (Can be out of metal or wood. Should collapse somewhat so it can be easily stored or tucked away.
- Install better lights under loft
- Reinforce fencing railing in loft
- Take white painted board in loft area, add legs to make an electronics table.
- Build shelf to be attached to and go over electronics bench.
- Use door to create a craft table to go along the south fence in the loft
- Attach metal vise and bench grinder
Shopping List
- 2 Large Garbage Cans
space_improvements.1409010981.txt.gz · Last modified: 2022/05/29 16:01 (external edit)